[Settings]
DebugOutFile = 0
Move8Unit = 0
XMoveEnable = 1
XMove = 0
Landscape_Compress = 0
COMPRESS_VALUE = 100
TrimLeft = 0
GraphicProcessMethod = 0

[ImageProcess_]
TrimLeft = 0
TrimTop = 0
MoveX = 0
MoveY = 0
CompressRate = 100

///////////////////////////////////////////////////////////////////////////////
[GlobalSettings]
PrinterName = Jolimark KMP-58
MenuVersion = 0
MenuDisplayExe = JMSettingManager2P
LogoDisplay = 0
InfoColor = 0
IconScheme = 2
EnterInstruction = 1B 1D 1E 05 01 1B 1D 1F
SaveInstruction = 1B 1D 1E 05 02 1B 1D 1F
InstructionTail = 1B 1D 1F
GetInstructionClass = 1B 1D 1E 05 03
AffirmReadDisable = 0
ReturnPrefix = 1B 1D 1E 05 03
TimeOutItem = 5000
TimeOutPage = 5000
ReadOnLastFail = 1
WriteReadDelay = 2000
ReadMenuDelay = 2000
SleepBeforeRead = 2000
///////////////////////////////////////////////////////////////////////////////
/// *********************************************************************** ///
///////////////////////////////////////////////////////////////////////////////
[BaseSection]
ItemCount = 4

[BaseItemME]
Name = Base
Icon = 00_Base
Title.CN = 常用设置
Note.CN = 打开常用设置窗口。
Title.EN = 常用设置
Note.EN = 打开常用设置窗口。
Title.CHT = 常用设置
Note.CHT = 打开常用设置窗口。


[BaseItem01]
Name = High_Quality
Icon = 15_High_Quality
Title.CN = 		打印方式
Note.CN =  		选择打印质量，从质量1到质量4，打印质量逐渐提升。
Title.EN = 		Printing Method
Note.EN =  		Select quality mode ,from quality1 to quality4 ,the higher the quality,the better.
Title.CHT = 	列印方式
Note.CHT =  	選擇列印品質，從品質1到品質4，列印品質逐漸提升。
SetInstruction = 1B 1D 1E 00 0F
GetInstruction = 0E
RuleType =  	Enum
Rule.CN =  		0=质量1\r  1=质量2\r  2=质量3\r  3=质量4\r
Rule.EN =  		0=Quality1\r  1=Quality2\r  2=Quality3\r  3=Quality4\r
Rule.CHT =  	0=質量1\r  1=質量2\r  2=質量3\r  3=質量4\r
Default = 		2

[BaseItem02]
Name = Cutter_Set
Icon = 43_Cutter_Set
Title.CN = 		半切位调整
Note.CN =  		设置半切的位置。
Title.EN = 		PartialCut Set
Note.EN =  		Set the position of PartialCut.
Title.CHT = 	半切位調整
Note.CHT =  	設置半切的位置。
SetInstruction = 1B 1D 1E 04 15
GetInstruction = 4E
RuleType =      Serial
Rule.CN =  		Min=-50 \r  Max=50 \r  Step=1 \r  DisplayAdd=0 \r  mmMultiply= \r  Title=  \r
Rule.CHT =  	Min=-50 \r  Max=50 \r  Step=1 \r  DisplayAdd=0 \r  mmMultiply= \r  Title=  \r
Rule.EN =  		Min=-50 \r  Max=50 \r  Step=1 \r  DisplayAdd=0 \r  mmMultiply= \r  Title=  \r
Default =  0

[BaseItem03]
Name = Cutter_Set_Lock
Icon = 43_Cutter_Set
Title.CN = 		半切锁定
Note.CN =  		将切刀锁定为半切状态。
Title.EN = 		PartialCut Set Lock
Note.EN =  		Lock the state of PartialCut.
Title.CHT = 	半切鎖定
Note.CHT =  	將切刀鎖定為半切狀態。
SetInstruction = 1B 1D 1E 04 19
GetInstruction = 6F
RuleType =      Enum
Rule.CN =  		0=关\r  1=开\r
Rule.CHT =  	0=關\r  1=開\r
Rule.EN =  		0=OFF\r  1=ON\r
Default =  1

[BaseItem04]
Name = Full_Cut_Set
Icon = 43_Cutter_Set
Title.CN = 		全切位调整
Note.CN =  		设置全切的位置。
Title.EN = 		FullCut Set
Note.EN =  		Set the position of FullCut.
Title.CHT = 	全切位調整
Note.CHT =  	設置全切的位置。
SetInstruction = 1B 1D 1E 04 16
GetInstruction = 5E
RuleType =      Serial
Rule.CN =  		Min=-50 \r  Max=50 \r  Step=1 \r  DisplayAdd=0 \r  mmMultiply= \r  Title=  \r
Rule.CHT =  	Min=-50 \r  Max=50 \r  Step=1 \r  DisplayAdd=0 \r  mmMultiply= \r  Title=  \r
Rule.EN =  		Min=-50 \r  Max=50 \r  Step=1 \r  DisplayAdd=0 \r  mmMultiply= \r  Title=  \r
Default =  0

///////////////////////////////////////////////////////////////////////////////

